Editing Functions
Editing/Creating a Preset
The GNX2 was designed to make the process of sound creation easy and intuitive. Because the GNX2 pro-
vides both Amp Modeling and Effects Processing, the editing functions have been divided into two sections:
the Amp/Cabinet Modeling section and the Effects section. The GeNetX™ technology contained in the
GNX2 allows you to go much further than mere Amp Modeling. GeNetX™ lets you create your own
Amp/Cabinet HyperModel™ and store this custom creation to a User Amp/Cabinet location. When editing
either the Amp/Cabinet Modeling,or the Effects section,you must start with one of the User or Factory
Presets. It is not possible to start with a completely empty preset. The preset you begin with does not need
to be in the location that you intend to save it. To begin creating a HyperModel™ or just edit the effects,you
must select a preset as your starting point.
Amp/Cabinet Modeling
Once you have selected a preset, you can select the Amp Models or Cabinet Types for your preset.
Amp/Cabinet Modeling is a technology that applies the tone of one of several vintage or modern Amp
Models and Cabinet Types to your guitar signal. The GNX2 includes accurate emulations of 15 popular Amp
Models,1 Acoustic Guitar Simulation,and 12 Speaker Cabinet Types.Your choices include:
Amp Models
Marshall® is a registered trademark of Marshall Amplification Plc. Vox® is a registered trademark of Korg UK. Fender,Matchless,HiWatt,
and Mesa Boogie, are trademarks of their respective companies and are in no way associated with DigiTech.
Cabinet Types
Editing Amp Models and Cabinet Types
Each GNX2 preset has a Green,Red, and Yellow (Warped) Amp Channel. The Green and Red Amp
Channels include individually selectable Amp Models, Cabinet Types,Gain, EQ,and Level settings.The
Speaker Cabinet can also be tuned meaning that you can select the Cabinet’s resonant frequency.Once
the Models have been selected for the Green and Red channels,the channels can be toggled instantly
using the Amp Channel Footswitch (only when FX Mode is active).Then the characteristics of the
two Models selected for the Green and Red channels can be Warped together resulting in a completely
new HyperModel™.
direct 1- Turns the cabinet modeling off
AMer2X12 2 - American 2x12
BRit4X12 3 - British 4x12
vntg4x12 4 - Vintage 30 4x12
BRit2X12 5 - British 2x12
AMer1X12 6 - American 1x12
BLnd2X12 7 - Blonde 2x12
Fane4X12
8 - Fane 4x12
GRnb4X12
9 - Greenback 4x12
botq4X12
10 - Boutique 4x12
amer4x10
11 - Bassman 4x10
65 1x12
12 - ‘65 Tweed 1x12
Jazz1x15
13 - Pro 1x15
EMPTY U1 to U9 - User Locations
DIRECT 1 - Turns the amp modeling off
BLacKFAC 2 - Based on a ‘65 Fender Twin Reverb
BOUTIQue 3 - Based on a Matchless DC30
RECTfied 4 - Based on a Mesa Dual Rectifier
HOTROD 5 - Based on a Mesa Boogie Mark II C
tweeD 6 - Based on a ‘57 Fender Tweed Deluxe
BRiTCMBo 7 - Based on a Vox AC30 top boost
CLeaNTUB 8 - A clean tube combo setting
BRiTSTcK 9 - Based on a ‘78 Marshall Master Volume
CRUNCH 10 - A nice crunchy tube amp combo
HI GAIN 11 - A high gain tube amp
BLUES 12 - A sweet blues tone
MdrnGAiN 13 - Based on a Marshall JCM900
FUZZ 14 - A vintage fuzz distortion
BASS MaN 15 - Based on a Fender Bassman
HIWATtaG 16- Based on a HiWatt 50 watt stack
ACOUSTic 17 - A flat top acoustic guitar
EMPTY U1 to U9 - User HyperModel™ Locations
13
Editing Functions
To Next Page
Loading...
Need help?
General
