5
7. Input 2 - Connect a second input to this jack for stereo operation.
Inputs 1 and 2 are processed separately through the stereo chorus
effect and then fed to Outputs 1 and 2 keeping true stereo
separation between channels.
8. Foot Switch Release Pins - These two pins are spring loaded
hinges that hold the Foot Switch in place. See page 9 for information
on accessing and changing the battery.
9. Indicator LED - Lights when the effect is turned on. When battery
power is low (approximately 15 minutes before it dies), the Indicator
LED begins to dim giving you advanced warning that very shortly you
will need to replace the battery.
10. Foot Switch - Turns the effect on and off.
To Next Page
Loading...
Need help?
General
