DigiTech HARDWIRE CR-7 User Manual

12
Hook-and-loop Pedalboard Pad
To attach the Pedalboard Pad, do the following:
1. Peel off the existing rubber skid pad from the bottom of the pedal.
2. Peel the adhesive protector from the back of the Pedalboard Pad.
3. Apply the Pedalboard Pad to the bottom of the pedal.

DigiTech HARDWIRE CR-7 Specifications

General

Brand	DigiTech
Model	HARDWIRE CR-7
Category	Music Pedal
Language	English