Congratulations!
You have just purchased a DigiTech
®
digital effect pedal.
Unlike many analog pedals, the number of hours digital pedals can be powered
with 9-Volt alkaline batteries is limited due to the constant draw which digital
signal processors require. Until battery technology advances to meet the
requirements of digital pedals, we suggest that a battery be used mainly for
demonstration and practice purposes.
If you notice a change in the LED’s brightness, or the pedal will not switch from
Bypass to Effect, replace the battery with a new 9-Volt alkaline battery or visit
your local DigiTech dealer to obtain a power adapter and unleash the pedal’s full
potential with unlimited power.
To Next Page
Loading...
Need help?
General
