DigiTech RP300 User Manual

User’s
Guide

DigiTech RP300 Specifications

General

Brand	DigiTech
Model	RP300
Category	Music Pedal
Language	English

Summary

Safety Precautions

Electrical Safety Warnings

Warnings about electric shock, not opening the unit, and keeping it dry.

Warranty Information

Product Warranty Terms and Conditions

Details the warranty period, limitations, and conditions for the RP300.

Guided Tour of the RP300

Getting Started with Connections

RP300 Mono and Stereo Wiring

Provides instructions for connecting the RP300 for mono and stereo amplifier setups.

Applying Power to the RP300

Powering Up the RP300 and Amplifier

Understanding RP300 Modes

Section Two - Editing Functions

Creating and Editing RP300 Presets

Guide to creating custom sounds by editing existing presets.

Storing and Managing Presets

Saving, Copying, and Naming Presets

Procedures for storing, copying, and naming custom presets on the RP300.

Section Three - Effects and Parameters

Pickup Simulator and Wah Effect

RP300 Effect Details

Compressor Effect Parameters

Amp Modeling and Cabinet Simulation

Describes the Amp Modeling and Cabinet simulation features and their parameters.

RP300 Sound Shaping Effects

RP300 Time-Based Effects

Delay Effect Parameters

Reverb Effect Parameters

Section Four - Other Functions

Assigning Parameters to the Expression Pedal

How to assign pedal control to various parameters like Amp Gain and Effect Level.

Expression Pedal Control for Modulation and Time Effects

Lists modulation and time-based effect parameters controllable by the Expression Pedal.

RP300 Advanced Control Features

Assigning LFOs to RP300 Parameters

How to assign Low Frequency Oscillators (LFOs) to control parameters.

RP300 Maintenance and Reset

Performing a Factory Reset

Procedure to restore the RP300 to its original factory default settings.

Calibrating the Expression Pedal

Steps for recalibrating the Expression Pedal for optimal performance.

RP300 V-Switch Sensitivity

Adjusting V-Switch Sensitivity