Need help?Do you have a question about the DigiTech RP360 XP and is the answer not in the manual?
General| Type | Multi-Effects Processor |
|---|---|
| MIDI I/O | No |
| USB | 1 x Mini-B |
| Effects Types | Delay, Reverb, Modulation, Distortion |
| Presets | 198 (99 factory, 99 user) |
| Looper | Yes (40 seconds) |
| Inputs | 1 x 1/4" instrument |
| Outputs | 2 x 1/4" |
| Footswitches | 3 |
| Expression Pedal | Yes (built-in) |
| Power Supply | 9V DC adapter (included) |
| Cabinet Models | 20+ |
Provides essential safety precautions and warnings for using electrical equipment.
Details product compliance with relevant directives and standards.
Advises on environmentally responsible methods for disposing of the product.
Outlines the terms, conditions, and limitations of the product warranty.
Guides users on obtaining technical assistance and returning products for repair.
Provides a general introduction to the RP360 and RP360XP guitar processors.
Enumerates the main features and capabilities of the device.
Details the LCD display, select knob, and back button on the unit.
Describes the expression pedal (RP360XP only) and function buttons.
Explains the function of the edit knobs and the multiple footswitches.
Describes the input, auxiliary, and headphone connectors on the rear panel.
Details the Control In, USB, and Power connectors on the rear panel.
Illustrates and explains connecting the RP360/RP360XP to a single amplifier.
Illustrates and explains connecting to two amplifiers for stereo sound.
Shows how to connect the unit to a mixer or PA for live sound reinforcement.
Illustrates and explains connecting the unit for digital audio recording.
Shows how to connect headphones for quiet practice sessions.
Introduces the performance state, basic navigation, and core controls.
Covers navigating, storing, copying, and naming presets.
Explains how to edit and modify effect parameters within presets.
Details how to change the order of effects within the signal chain.
Explains how to insert new effects into the preset signal chain.
Describes how to remove effects from a preset.
Covers assigning effects for stomp mode control via footswitches.
Explains output level adjustments for individual presets and globally.
Describes how to bypass all effects in a preset, leaving only the dry signal.
Explains how to use the built-in guitar tuner for accurate tuning.
Details how to use the phrase looper for recording and playback of guitar parts.
Explains the sound check feature for auditioning effects on a recorded loop.
Details using the built-in drum machine patterns for practice and timing.
Explains connecting external audio playback devices for jamming along.
Details controlling delay time by tapping a footswitch to the music's tempo.
Explains how to control effect parameters using the expression pedal.
Details assigning LFO for modulation effects and setting waveform parameters.
Explains the different footswitch modes: Preset, Stomp, and Bank.
Describes the specific functions of Stomp and Bank footswitch modes.
Sets output optimization for connecting to an amplifier or mixer.
Sets the output to operate in mono or stereo.
Adjusts the input level sent from the RP via USB to the computer.
Adjusts the mix between the RP's processed signal and computer playback audio.
Adjusts the contrast of the LCD display for better readability.
Configures the Control In port for external expression pedals or footswitches.
Sets the phrase sampler for Looper or Sound Check use.
Guides users through calibrating the built-in or external expression pedal.
Resets the unit to factory default settings, including presets and system settings.
Displays the currently installed firmware version of the unit.
Describes the icons used for navigating and editing effects.
Details the amp modeling technology and its associated parameters.
Details the speaker cabinet modeling technology and its descriptions.
Describes the compression effect and its various models.
Describes the delay effect and its different models.
Describes the distortion effect and its various models.
Details the 3-band semi-parametric equalizer and its controls.
Explains assigning parameters to the expression pedal for real-time control.
Details assigning LFO for modulation effects and setting waveform parameters.
Covers Chorus, Flanger, Phaser, Vibrato/Rotary, and Envelope Filter effects.
Describes Whammy, Pitch, Detune, Harmony, and Octave effects.
Describes the noise gate models and their parameters.
Describes the various reverb models and their parameters.
Explains the volume module and its placement in the signal chain.
Describes the wah effect and its different models.
Lists system requirements for downloading and using the Nexus editor/librarian software.
To Next Page
