DigiTech RP360 XP User Manual

46
RP360 / RP360 XP
USB Record Level
This system parameter provides a digital level
control for increasing or decreasing the level
sent from the RP’s USB port to your computer
recording application� The selectable range is -12
dB to 24 dB� This parameter is only available when
a USB connection has been made to the RP�
Plexi-Drive 1
LOOPER READY
SYSTEM SETTINGS 2/4
USB
RECORD LVL
USB
PLAY MIX
LCD
CONTRAST
0 dB USB:RP
8
To edit the USB RECORD LEVEL parameter:
1�
Connect the RP to your computer using a standard USB cable�
2� Press the SYSTEM button�
3� Press either the SELECT knob or SYSTEM button repeatedly until the LCD display reads 2/4 in
the upper right-hand corner of the LCD display�
4� Turn the EDIT 1 (USB RECORD LVL) knob to adjust the setting�
5� Press the BACK button or any FOOTSWITCH to exit the System Settings menu and return to
the Performance state�

DigiTech RP360 XP Specifications

General

Type	Multi-Effects Processor
MIDI I/O	No
USB	1 x Mini-B
Effects Types	Delay, Reverb, Modulation, Distortion
Presets	198 (99 factory, 99 user)
Looper	Yes (40 seconds)
Inputs	1 x 1/4" instrument
Outputs	2 x 1/4"
Footswitches	3
Expression Pedal	Yes (built-in)
Power Supply	9V DC adapter (included)
Cabinet Models	20+