DigiTech RP360 XP User Manual

54
RP360 / RP360 XP
Firmware Version
Displays the firmware version currently installed in
the RP�
Plexi-Drive 1
LOOPER READY
SYSTEM SETTINGS 4/4
CALIBRATE
PEDAL
FACTORY
RESTORE
FIRMWARE
VERSION
START START
v 1.1.0.0
To check the currently installed firmware version:
1�
Press the SYSTEM button�
2� Press either the SELECT knob or SYSTEM button repeatedly until the LCD display reads 4/4 in
the upper right-hand corner of the LCD display�
3� The firmware version will be displayed in the lower right-hand portion of the LCD display�
4� Press the BACK button to exit the System Settings menu�

DigiTech RP360 XP Specifications

General

Type	Multi-Effects Processor
MIDI I/O	No
USB	1 x Mini-B
Effects Types	Delay, Reverb, Modulation, Distortion
Presets	198 (99 factory, 99 user)
Looper	Yes (40 seconds)
Inputs	1 x 1/4" instrument
Outputs	2 x 1/4"
Footswitches	3
Expression Pedal	Yes (built-in)
Power Supply	9V DC adapter (included)
Cabinet Models	20+