2.Value Buttons - The Value Buttons perform various functions depending on which mode is
selected. In Play mode, these buttons control RP50’s Master Level. In Edit
mode, these buttons adjust the selected effect. These buttons also change
the Pattern,Tempo, and Level of the Drum machine when it is turned on.
When the Tuner is enabled, these buttons select the tuning reference.
3. Effect/Edit Buttons - Pressing either Edit buttons enters Edit mode and selects the
individual effects to be edited. Press the left and right Edit buttons to
move through the effects. Each effect LED will light to indicate which
effect you are editing
4. Drums - The Drums button is used to turn on and off the RP50’s drum machine. When the
Drums feature is active, the Drums LED lights and the selected drum pattern plays
continuously.
5. Effect LEDs - The Effect LEDs provide information regarding the current preset. In Edit
mode, the LEDs indicate the effect selected for editing. In Tuner mode, the
LEDs indicate whether the note played is sharp, flat, or in tune.
6. Display - The Display provides information for different functions depending on the selected
mode. In Play mode, the display shows the selected preset number. In Edit mode,
the display shows the value of the parameter being adjusted. When the Tuner is
enabled, the display shows the note played.
7. Store - The Store button saves your custom edits to the user presets.
3
To Next Page
Loading...
Need help?
General
