DigiTech S100 - Page 17

Maximum Delay times
D-1 (Half=1000 milliseconds and Whole=2000 milliseconds)
D-2 (Half=700 milliseconds and Whole=1000 milliseconds)
D-3 (Half=1000 milliseconds and Whole=2000 milliseconds)
Delay Coarse This parameter controls the length of the Delay Coarse time Range is
from .1 (which equals 100 milliseconds) to 2. 0 (which equals 2
seconds).
Delay Fine This parameter controls the length of the Delay Fine time. Range is from
0 to 99 milliseconds.
Delay Time This parameter controls the length of the Delay Time that is offered in
the Karaoke. Delay Time settings are 1-5.
Feedback This parameter controls the amount of delay repeats in the delay effect.
Range is from 0 to 99% and repeat-hold (rh).
Repeat This parameter controls the amount of delay repeats in the D-4 Karaoke
effect. Range is from 1 to 10.
Level This parameter allows you to set the overall level of the selected effect.
Range is from 0 to 99.
S-100
15
Section -3 Effects and Parameters
User Guide