Need help?Do you have a question about the DigiTech TALKER and is the answer not in the manual?
Audio Specifications| microphone path signal/noise | -91 dB |
|---|---|
| instrument path signal/noise | -90 dB |
| frequency response | 10 Hz to 14.5 kHz |
| microphone path input range | -34 dBV-+15 dBV |
| instrument path input range | -14 dBV-+15 dBV |
| output range | -∞ to 11.3 dBV |
| THD+N | 0.04% |
| microphone path input impedance | 20 kOhm |
| instrument path input impedance | 500 kOhm |
| bypass | Hard-wired |
| input connectors | balanced XLR |
| output connectors | unbalanced 1/4" mono |
Power| adapter output | 9.75 VAC @ 820 mA |
|---|
Weight and Dimensions| size | 8" X 2.75" X 7.25" |
|---|---|
| weight | 6 lb. / 2.7 Kg. |
Details the controls and indicators on the front of the DigiTech Talker unit.
Explains the rear panel connections and settings, including power and routing.
Guidance on using the Talker with guitar and distortion effects for enhanced sound.
Instructions for connecting drum machines to create rhythmic effects with the Talker.
How to combine keyboards and drum machines for unique sonic textures.
Setup advice for using the Talker with bass guitar and vocal inputs.
Tips for integrating pre-recorded audio sources like CDs or tapes.
Suggestions for using recorded tracks with the Talker for new effect generation.
To Next Page