30
Expression Pedal: The Vocalist
®
Live 4 can use either a standard passive
guitar volume pedal or a resistance-based expression pedal.
If using a standard guitar volume pedal, it should use a 250
kOhms or higher pot. If using an expression pedal, it must
offer a TRS connection and offer a minimum resistance of
10kOhms.
Signal Processing: Freescale DSP56367 DSP with custom firmware. All signal
processing takes place at 44.1KHz sample rates, native.
Power: US and Canada: 120 VAC, 60 Hz Adapter: PS0913B-120
Japan: 100 VAC, 50/60 Hz Adapter: PS0913B-100
Europe: 230 VAC, 50 Hz Adapter: PS0913B-230
UK: 240 VAC, 50 Hz Adapter: PS0913B-240
Dimensions: 8.25” Length x 14.18” Width x 2.08” Height
Weight: Approximately 3.3 lbs.
Environment: Operating Temp: 32-104 degrees F, (0-40 C)
To Next Page
Loading...
