Introduction
¾ Cable System
¾ Troubleshooting
The first four sections describe and explain how to use the main components: the receiver, the remote
display, the transmitter, and the battery charger. The next two sections give instructions for using the
system for locating and for steering to a target. These are followed by a description of and instructions for
using the Eclipse cable transmitter system. The final section provides quick-reference troubleshooting
information. An appendix is also included with reference tables.
NOTE: Be sure to read carefully the Safety Precautions and Warnings section at the front of this
manual before you use the equipment.
10 DigiTrak
®
Eclipse
®
Operator’s Manual
To Next Page
Loading...