www.digitrax.com- 56 -
9.3.4 Mars Lights On F1
To set up a Mars lights:
1. Wire lamp or LED to F1 and Blue Common
2. Program CV51 to 34
3. Mars light will be on when F1 is turned ON. This will make it non-
directional and ON whenever F1 is ON no matter which direction
the loco is running.
9.3.5 Rotary Beacon on F1
To set up a rotary beacon:
1. Wire lamp or LED to F1 and Blue Common
2. Program CV51 to 038
3. Rotary beacon will be on when F1 is turned ON. This will make it
non-directional and ON whenever F1 is ON no matter which direc-
tion the loco is running.
9.3.6 Rule 17 Dimming on F0Fwd and F0Rev
To set up a rule 17 dimming:
1. Wire lamp or LED to F0F and Blue Common
2. Wire lamp or LED to F0R and Blue Common
3. Program CV49 to 104
4. Program CV50 to 120
5. When loco is reversed lights will dim on opposite end of locomotive.
To Next Page
