www.digitrax.com- 71 -
Consult the instruction sheet provided with your decoder or the project descrip-
tion area of the sound project (.spj) le you have loaded into the decoder to
determine how CVs are used in the specic decoder and in the specic sound
project le.
For more information on general decoder installation and programming tech-
niques and examples visit www.digitrax.com.
CAUTION: Programming track voltage must not exceed 16V when pro-
gramming SoundFX decoders.
11.3 Change Sound Scheme: CV60
The factory supplied sound project in your decoder may more than one sound
scheme. 8-bit decoders have dual schemes with generic steam and diesel and
16-bit decoders have multiple schemes. Downloaded sound projects may also
have more than one sound scheme included. The sound scheme that the decoder
will play is selectable by programming the appropriate value into CV60. Consult
the Instruction Sheet that came with your decoder or the project description in
the .spj le for available CV values for the particular sound project downloaded
in your locomotive.
11.4 Customizing Sound Schemes CV132-CV256
SoundFX sound CVs in the range of CV132 to CV256 let you customize your
decoder without having to reprogram or change the installed sound scheme.
To Next Page
