What to do if my Digitus DA-90392 shows E01 error?
The E01 error code on your Digitus Control Panel indicates a weight overload. To resolve this, remove some items from the desktop to reduce the load.
Why does my Digitus DA-90392 show error E06?
Error E06 on your Digitus Control Panel means the collision avoidance system has been activated. Make sure to remove any objects that are within the desk's range of motion.
How to fix E10 error on Digitus Control Panel?
The E10 error on your Digitus Control Panel indicates that the collision avoidance system has been triggered. Clear any obstructions from the desk's operational area.
What to do if Digitus DA-90392 Control Panel displays E05 error?
If your Digitus Control Panel is showing an E05 error, it could mean that some cords are disconnected or broken. First, disconnect the power supply, then check the motor cord connection. If the cable connection is correct and the error persists, contact your dealer.
What to do if my Digitus DA-90392 shows error E03?
If your Digitus Control Panel displays error E03, it indicates that the desk is running in the wrong direction. To fix this, disconnect the power, check the motor cord connection, and then reset the system.
How to solve E04 error on Digitus DA-90392?
The E04 error on your Digitus Control Panel indicates a height difference in the columns. You should reset the system to resolve this issue.
What does E08 mean on my Digitus DA-90392?
The E08 error on your Digitus Control Panel relates to the digital controller. Disconnect the power and check the controller's connection.
How to troubleshoot E12/E13 error on Digitus DA-90392?
To troubleshoot E12 or E13 errors on your Digitus Control Panel, first disconnect the power. Wait for 30 seconds until the display turns off completely, and then reconnect the power.
What to do if Digitus Control Panel displays E02/HOT error?
If your Digitus Control Panel shows E02/HOT, allow your desk to cool down. Leave it idle for about 18 minutes.
General| Brand | Digitus |
|---|---|
| Model | DA-90392 |
| Category | Control Panel |
| Language | English |
To Next Page