3. System Requirements
Console
A VGA, SVGA, Multisync monitor capable of the highest resolution.
PS/2 and/or USB Keyboard/Mouse
Computer or Server
The following equipment must be equipped with each computer or server.
- A VGA, SVGA or Multisync card.
- Type A USB port and/or PS/2 6 pin mini-DIN for Keyboard and Mouse.
Cables
The KVM Switch with USB and PS2 console must be used specific custom 4-in-1 cables.
To purchase the specific cable sets, please contact your dealer.
4. Installation
LED Indicators:
Selected
: RED LED indicates that the KVM Switch is selected to the corresponding PC.
On-Line :
GREEN LED indicates that the KVM Switch is ready to the corresponding PC.
AutoScan
: GREEN LED flash indicates that the KVM Switch is in auto-scan mode.
Reset Switch :
Press this switch for a system reset. This switch must be pushed with a thin object,
for example, such as the end of a paper clip, or a ball point pen.
To Next Page
Loading...
Need help?
General
