Click ‘Finish’ to finish installation
and start admin utility.
Admin utility will search for all cameras
available on your local network. You
can click ‘Search Camera’ button to
search for cameras on your network
again.
Search Camera icon
When a (or more) camera is found,
select it by mouse to highlight it,
and then click ‘Browse Camera via Web’
button to launch web browser to
connect to IP camera.
If the ‘IP Address’ of camera is ‘0.0.0.0’,
please click ‘Configure Camera’ button.
‘Browse Camera via Web’ icon
‘Configure Camera’ icon
To Next Page
Loading...
