You’ll be prompted to input username
and password. Username is ‘admin’
(can not be changed), default password
is ‘1234’.
In this menu, you have to assign an IP
address and it’s Netmask, Gateway,
and DNS to be used by the camera,
so your computer can connect to it.
Please don’t alter the setting of ‘Web
Port’ unless you know what will be
affected. Click ‘OK’ when finish.
If you don’t know how to specify an
IP address for your camera, please
ask your network administrator or
experienced technician.
Now you can use web browser to
connect to IP camera by inputting
IP camera’s IP address in the web
browser’s address bar, or click
‘Browse camera via Web’ icon.
To Next Page
Loading...
