Need help?Do you have a question about the Digitus DN-16035 and is the answer not in the manual?
General| Model | DN-16035 |
|---|---|
| Category | IP Camera |
| Sensor | 1/2.7" CMOS |
| Lens | 3.6 mm |
| Day/Night | Yes |
| IR Range | Up to 20 m |
| Video Compression | H.264 |
| Frame Rate | 30 fps |
| Connectivity | Wired |
| Power Supply | DC 12V |
| Operating Temperature | -10°C to 50°C |
| Weight | 300 g |
| Night Vision | Yes |
| Resolution | 1920 x 1080 |
| Network Interface | RJ45 |
Provides the first steps for installing the IP camera, including unpacking and connecting cables.
Details how to find the default IP address and troubleshoot if it's not 192.168.2.3.
Guides on accessing Network Connections and changing IP settings.
Details on setting the IP address and subnet mask in TCP/IP properties.
Instructions for setting the IP address and two methods for recovery if forgotten.
Explains how to use the admin software to locate cameras on the network.
Explains how to configure LAN settings (DHCP/Manual IP) and network security.
Instructions for logging into the camera's web management interface using default credentials.
Guides on installing the necessary ActiveX plugin for web browser access.
Details the steps to run and complete the installation of the ActiveX plugin.
Instructs on how to check the camera's image display in the web browser after plugin installation.
Detailed descriptions of settings like Pan/Tilt Speed, Video Type, Frequency, Flip Mode, Brightness, and Volume.
Explains how to control camera movement and set preset positions.
Introduces the video settings menu and the available video types.
Details on configuring MJPEG video resolution, quality, and frame rate.
Details on configuring MPEG4 video resolution, quality, and frame rate.
Details on configuring H.264 video resolution, quality, and frame rate.
Instructions on setting and recalling up to 9 preset camera positions.
Explains how to save new preset points and remove existing ones.
Guides on creating automated camera movement sequences between preset points.
Details on configuring IP address, subnet mask, gateway, DNS, and web port for LAN.
Guides on enabling wireless connection and selecting network type (Infrastructure/Adhoc).
Explains how to configure Dynamic DNS for remote access with dynamic IP addresses.
Introduces the motion detection feature for monitoring activities and capturing snapshots.
Details on enabling motion detection, setting intervals, recording time, and file types.
Covers firmware upgrades and resetting camera to factory defaults.
Step-by-step guide for installing the bundled IP camera surveillance software.
Overview of the surveillance software interface and its main components.
Introduction to configuring the surveillance software for connecting cameras.
Details on the 'Camera' tab for searching and adding cameras to the software.
Explains fields like Name, Model, IP, Username, Password, and Video Format.
Details on enabling motion-triggered recording and setting recording duration.
Guides on setting a password to protect the IP camera surveillance software.
Details on using PTZ controls to change camera direction and return to home position.
Provides solutions for common problems like inability to connect to the IP camera.
Step-by-step guide to creating a free DynDNS account for dynamic IP mapping.
Guides on configuring routers/firewalls to enable IPCAM access from the internet.
Instructions for setting up Dynamic DNS mapping on a router using DynDNS.
Details on opening necessary ports (HTTP, RTSP) on router/firewall for internet access.
To Next Page
