47
2.3.2 Grand Tour
You can make the camera move between many pre-defined positions, and
define the time you wish to pause at every position; this is called as ‘Grand
Tour’.
Before you can use this function, you have to define at least 2 positions in
‘Preset Points’ section (refer to last section for detailed information).
The descriptions of every setting in this menu will be given below:
Item Description
Add Add a new set of grand tour (see instructions below)
Edit Edit a selected grand tour. The parameters for an existing
grand tour will be recalled and you can modify them.
Start / Stop Select a grand tour and click this button to start grand
tour, click again to stop it. After a grand tour has been
started, go to ‘Camera’ menu to see it in action. Only one
grand tour can be activated at the same time.
Remove Remove a grand tour from the list.
If you wish to add a new set of grand tour, click ‘Add’ to start to add a new
grand tour set:
To Next Page
Loading...
