129
2. Enable this function, and fill IP CAM’s IP address in ‘Private IP’ (or similar
field), select ‘TCP’ or ‘BOTH’ as data type, and input these port numbers for
the services you wish to access from Internet:
IP CAM web configuration and view live image: 80
AV Control Port: 4321
RTSP: 554 and 50000 to 60000
Please note that if you changed the port number of web configuration / view
or RTSP, you have to change the port forwarding setting for your router
accordingly.
3. If IP CAM is the only one service you wish to access from Internet, you can
also use ‘DMZ’ function to access IP CAM:
Simply fill the IP address of IP CAM and you can access IP CAM from the
IP address of your router directly.
To Next Page
Loading...
