4
1. OVERVIEW
1.1 Package content
□ Network camera □ Camera Bracket
□ Installation Guide □ Adapter
□ CD-ROM disc (including user manuals & CMS software “Video Viewer”)
1.2 Rear Panel
1 Ethernet: Connect your network cable.
2 DC 5V: Connect the supplied regulated power supply.
3 Reset:
With the power connected, press and hold for a few
seconds to reset all parameters, including the IP
address to factory default settings.
The camera will reboot after default reset. You may
check the blinking frequency of the LED indicator to
know if the camera is in the reset default mode.
Please do not disconnect your camera during the reset
process.
To Next Page
Loading...
