7
For Windows XP users:
a) Select “start” “Control Panel” “Network and Internet Connections” “Network Connections” (If
you’re in “Category View”).
In “LAN or High-Speed Internet”, right-click on “Local Area Connection”, and select “Properties”.
Note: If your local area connection is not enabled, please also enable it.
b) In the “General” tab, select “Internet Protocol (TCP/IP)”, and select “Properties”.
c) In the “General” tab, select “Use the following IP address”, and set the IP address to “192.168.1.XXX”
(XXX can be any value from 1~255 except 10).
Note: It’s recommended to note down the current settings first and then change as
instructed. It’s helpful when you need to restore the PC network settings for
connecting to Internet later.
d) Click “OK” to close the “Internet Protocol (TCP/IP) Properties” dialog box. Then, click “Close” to close
the “Local Area Connection Properties” dialog box.
To Next Page
Loading...
Need help?
General
