21 / 24
3.1.2 Setup Soft-AP Security
To setup security options for Soft-AP, configure ‘Wireless Network Security’
section as follow:
The description of setup items about wireless security are listed below:
Network
Authentication
Select network authentication mode from dropdown
menu.
Data Encryption
Select data encryption method from dropdown menu.
ASCII / PASSPHRASE
If the encryption method is WEP, check either ‘ASCII’ or
‘PASSPHRASE’ box and input it in the box as WEP
passphrase.
Key Index
Select WEP key index (1-4). If you don’t know which one
you should use, select 1.
Network key /
Confirm network key
IF network authentication mode is WPA, please input
WPA passphrase in both box.
To save changes, click ‘OK’; otherwise click ‘Cancel’ to leave this menu and keep
settings untouched.
To Next Page
Loading...
