22 / 24
3.2 Advanced Settings
If you want to setup advanced settings of software access point, select
‘Advanced’ menu. If you don’t know the meaning and effects of these settings,
keep them untouched.
The description of all setup items are listed below:
Beacon Interval Please input wireless beacon time interval here.
DTIM Period
Please input DTIM (Delivery Traffic Indication Message)
here.
Preamble Mode
Select wireless frame preamble mode (long or short) from
dropdown menu.
Set Defaults Reset all settings back to factory default value.
Apply Save changes.
If you changed any setting here and cause problem on communicating with
wireless clients, click ‘Set Defaults’ to reset all settings back to default setting.
To Next Page
Loading...
Need help?
General
