4
AP Interface:
Reset: Reset Button, it makes AP revert to default data after press it
15 seconds.
WAN: WAN Port, connect to the Internet.
LAN: LAN Port can connect to LAN devices.
LED: LED Indicator of WAN port and LAN port
DC: DC power connector
Safety Precautions
Only use the device within the specified temperature range
for: 0 ~ 40°C
When not in use, store the product in a clean and dry place in
temperatures between 0°C and 40°C
Do not let the indoor devices come into contact with liquids
Ensure that the indoor devices are only used inside. These
devices are not intended for outdoor use and would be damaged
During thunderstorms, there is a danger of lightning strike and
due to overvoltage damage to connected electrical appliances
Do not install the product during a thunderstorm
Disconnect the product from power source during a
thunderstorm
Keep the devices outside the reach of children, since these
components can be dangerous
Never try to repair the device by yourself. Repair and
maintenance work must be carried out by specialists
In case of problems contact our customer service
Dust, humidity and vapours as well as sharp cleaning agents or
solvents can damage the product
Disconnect the product from the power source before cleaning
Clean the product with a slightly damp, lint-free cloth
To Next Page
Loading...
Need help?
General
