9
3.2. WALN Setting
AP has a SSID configuration information by default, which can modify
or add SSID. Click add SSID as shown below and fill in the relevant
parameters.
Note: Up to 4 SSID can be added in the single frequency,
and 8SSID can be added in dual frequency.
Radio: 2.4G is selected
SSID: SSID can be hidden.
Max Clients: This refers to the number of connections per SSID.
VLAN: Refer to the VLAN of the SSID, by USING OF VLAN
switches or gateways to implement VLAN isolation of
the SSID.
Isolation: Terminals connected to the same SSID are isolated from
each other after opening.
The RF configuration is all SSID configurations for AP.
To Next Page
Loading...
Need help?
General
