6
POE Power Supply
POE Adapter Power Supply:
The POE network port of the POE Adapter is connected to the WAN
port of the wireless AP through the network cable, and the power
adapter is inserted into the socket to supply power to AP through the
network cable. Please note the POE adapter needs to match the
voltage and current supported by the AP. Here, 48V 0.5A is
supported.
Note: PoE adapter and PoE switch are not included in the
package.
Software Operation
This Ceiling AP based on the in-depth development of Qualcomm
SDK，it is a plug and play，designed for wireless engineering. It
integrates seamless roaming, load balancing, multiple SSID (which
can be hidden), multi-service isolation, IPTV transmission, channel
optimization, AP tracking, AP diagnosis and other functions.
To Next Page
Loading...
Need help?
General
