Digitus DS-43309 - Page 8

8
Output voltage
DC, 12V
V
Nameplate output voltage. Shall
indicate whether is AC or DC.
In cases where more than one
physical output or more than one
output voltage at load condition 1
are measured, the sets of
available Output voltage
—
Output current
– Output power
shall be published.
Output current
2
A
Nameplate output current.
In cases where more than one
physical output or more than one
output vol
tage at load condition 1
are measured, the sets of
available Output voltage
—
Output current
– Output power
shall be published.
Output power
24
W
Nameplate output power.
In cases where more than one
physical output or more than one
output voltage at load
condition 1
are measured, the sets of
available Output voltage
—
Output current
– Output power
shall be published.
Average active
efficiency
86.2
%
Declared by the manufacturer
based on the value calculated as
arithmetical mean of efficiency at
load
conditions 1-4.
In cases where multiple average
active efficiencies are declared for
multiple output voltages available
at load condition 1, the value
published shall be the average
active efficiency declared for the
lowest output voltage.