6. Also, you can format USB hard disk by “FNet FAT32 Utility” and then you can start the
backup function (The detail format steps please refer to the section of “FNet FAT32
Utility”)
FAT32 Format Utility
For the current HDD capacity is getting larger, the Fat32 Format Utility in Windows
2000/XP is not able to support the HDD size exceeding 32GB; FNet recommends FNet
Fat 32 Format Utility, which can format the large capacity to be FAT32 Format rapidly and
fully, the size even maximums up to 4TB (4000GB)
(Attention: all data in USB HDD will be deleted if you use this function)
1. Please plug USB HDD, and turn on the computer
2. Click “Start ” → “All Programs” → “PCClone EX” → “FNet FAT32 Format”
To Next Page
Loading...
Need help?
General
