Dillenger C965 - Error Code Definitions

18
Error Code denitions
The display will give a warning message when there’s an error in the system. The LCD display
will show an error code on the top of the display, the error codes range from 01H~FFH. You
can nd the denitions in the table below.
Error Code Error description Error Code shown
0x01 Normal No error
0x03 Brake signal 03 on the top of the display
0x06 Low voltage protection 06 on the top of the display
0x07 High voltage protection 07 on the top of the display
0x08 Hall line of motor error 08 on the top of the display
0x09 Phase line of the motor error 09 on the top of the display
0x10 High temperature of controller 10 on the top of the display
0x11 Controller’s temperature sensor error 11 on the top of the display
0x12 Current sensor error 12 on the top of the display
0x13 Battery temperature sensor error 13 on the top of the display
0x14 Motor temperature sensor error 14 on the top of the display
0x21 Motor speed sensor error 21 on the top of the display
0x22 BMS communication error 22 on the top of the display
0x23 Head light error 23 on the top of the display
0x30 Communication error 30 on the top of the display