To Next PageTo Next Page
Need help?Do you have a question about the Dillon Precision Products RL550C and is the answer not in the manual?
Understand the inherent dangers of reloading and the system's safety features.
Minimum safety rules and common sense practices for operating the RL550C safely.
Details on what the RL550C warranty covers and its exclusions.
Identifying and removing parts from the shipping box layers.
Instructions for securely attaching the RL550C reloader to a workbench.
List and images of optional accessories to enhance RL550C functionality.
Process for inserting, de-priming, sizing, and priming cases.
Flaring pistol case mouths and dispensing powder.
Placing and seating bullets into cases.
Crimping bullets and ejecting completed cartridges.
Adjusting locator, pistol/rifle size die, and de-prime assembly.
Adjusting primer feed, seating, and filling the magazine.
Setting up powder measure, belling case mouths, and adjusting powder charge.
Adjusting dies for bullet seating and determining COAL.
Adjusting dies for roll and taper crimping.
Table of conversion kits for various calibers, shellplates, and funnels.
Steps for replacing the shellplate for caliber conversion.
Procedures for converting between small and large primer systems.
Steps to replace powder bars for different powder dispensing needs.
Procedure for precise alignment of critical reloader components.
Fine-tuning the primer slide and feed body for correct primer drop.
Ensuring the correct positioning of the operating rod bracket.
Addressing dirt, residue, and general upkeep problems.
Troubleshooting problems with shellplate rotation and indexing.
Problems related to bending or breaking depriming pins.
Addressing cases scratched during the sizing process.
Resolving problems with primer feeding, seating, and alignment.
Troubleshooting erratic case flaring or belling.
Addressing inconsistent powder charges or measure movement.
Resolving case neck crumpling during bullet seating.
Diagnosing bulged cases or improper crimps.
Procedure for lightly oiling the mainshaft.
Contents of the RL550C maintenance kit.
Greasing link arm zerk fittings and grease ports.
Removing, cleaning, and lubricating upper pivot link pins.
Greasing the lower main shaft pivot pin.
Routine cleaning to remove residue and debris.
Listing of rapid trim dies and associated toolheads.
Using the Super Swage 600 to remove primer pocket crimps.
An exploded view of the entire RL550C reloader.
Exploded view of the reloader's frame and lower components.
Exploded view of the toolhead and its components.
Exploded view of the platform and its associated parts.
Exploded view of the primer feed mechanism.
Exploded view of the powder measure and its parts.
Exploded view of the primer early warning system components.
Exploded view of the primer slide assemblies.
Methods for cleaning fired brass before reloading.
Proper lubrication techniques for brass cases.
Understanding and setting cartridge headspace during sizing.
Fundamental information about primers and safety precautions.
Importance of keeping detailed reloading records.
General| Shell Plate | Interchangeable |
|---|---|
| Case Feed | Manual |
| Stations | 4 |
| Die Compatibility | Standard 7/8"-14 threaded dies |
| Color | Blue |
| Caliber | Multiple, depending on dies and conversion kits used |
| Priming System | Automatic |
| Operation | Manual |
| Construction | Steel |
