Need help?Do you have a question about the Dillon Precision Products Super 1050 and is the answer not in the manual?
Describes the automatic insertion of empty cases into the shellplate.
Details the resizing and depriming of spent cartridge cases.
Explains internal case support, expansion, and primer pocket swaging.
Covers the installation of new primers with an early warning system.
Describes case mouth belling and automatic powder dispensing.
This station is open for visual inspection of the cartridge.
Explains seating the bullet to its proper depth.
Details crimping the bullet and ejecting the finished cartridge.
Instructions for securely mounting the reloading machine to a workbench.
Guide for assembling and installing the automatic casefeeder components.
Guidance on readjusting the casefeeder micro-switch for different calibers.
Instructions for adjusting the operating handle to three different length settings.
Explains the process and necessity of swaging primer pockets.
Details on converting and adjusting the swage system for different needs.
Instructions for removing the shellplate lock nut and the shellplate.
Steps to replace the casefeed plunger for different calibers.
Instructions for installing and adjusting the sizing/decapping die.
How to install and adjust the expander die for case mouth expansion.
Common causes and solutions for indexing problems on the machine.
Troubleshooting issues related to case feeding and insertion into the shellplate.
Solutions for problems encountered during case resizing and decapping.
Addressing issues with primer pocket swaging, such as crushing or smearing.
Troubleshooting high primers or crushed primers during the priming stage.
Recommendations for using Loctite on threaded parts during maintenance.
Instructions for cleaning and lubricating the swage mechanism.
Detailed list of lubrication points for the Super 1050 machine.
General| Type | Progressive Reloading Press |
|---|---|
| Manufacturer | Dillon Precision Products |
| Model | Super 1050 |
| Primer Feed | Automatic |
| Caliber | Multiple (Requires caliber conversion kit) |
| Shell Plate | Interchangeable Shell Plates |
| Caliber Conversion | Required for each caliber change |
| Primer System | Automatic |
| Case Feeder | Optional Case Feeder |
| Dimensions | Variable based on configuration |
| Warranty | Lifetime Warranty |
To Next Page
