Setting/Modifying the Time Profi les
• Press the MENU key from the home screen.
• Use the arrow keys to highlight the Schedule Icon,
• Press ENTER to enter Timer Settings.
• Use the arrow keys to highlight ‘Edit’ and Press ENTER again to confi rm selection.
• Use the arrow keys to select the day of the week you wish to set and confi rm
using the ENTER key.
Day 1 = Monday
Day 2 = Tuesday
Day 3 = Wednesday
Day 4 = Thursday
Day 5 = Friday
Day 6 = Saturday
Day 7 = Sunday
Day
selection
screen
• Use the arrow keys to select the period (1-4) you wish to set and confi rm using
the ENTER key.
• Use the arrow keys to edit the ‘On’ time, confi rm each digit using the ENTER
key. After the fi nal digit is confi rmed the remote will automatically enter the set-
point setting screen.
• Use the arrow keys to set the desired set-point temperature, confi rm using the
ENTER key.
• The ‘O ’ time should then be set using the same method as the ‘On’ period.
You will then be returned to the Period setting screen, with the next period highlighted.
The previous Period has been successfully set and is confi rmed by a beep from the
appliance. The remainder of the periods can then be set as per the above procedure.
Alternatively, the timer setting mode can be exited by pressing MENU or continuously
pressing the BACK key
NOTE:
If the MENU key or the BACK key is used exit setting mode from the time or
temperature setting screen the changes will not be saved, it is essential that the
fi nal ‘O ’ time is confi rmed and a beep is heard from the appliance before exiting
this mode.
22
To Next Page
Loading...
Need help?
General
