To Next PageTo Next Page
Need help?Do you have a question about the Dimplex Cadiz Eco CDR2T and is the answer not in the manual?
Standard instruction to read and keep the manual for future reference.
Provides critical safety warnings and instructions for safe operation and installation.
Describes the heater's design for domestic dwellings and ease of movement.
Details electrical safety, earthing requirements, and wiring instructions for the plug.
Specifies the required clearance and surface for safe heater positioning.
Instructions on plugging in the heater and how the neon lights indicate heating.
Explains the function of the On/Off button and the thermostat.
Describes how to set the thermostat for temperature control and frost protection.
Details the half heat and high heat settings controlled by selector switches.
Emphasizes observing safety warnings when operating the heater in auto mode.
Explains AUTO and MAN ON modes for the digital timer.
Describes how to lock and unlock the keypad for safety.
Instructions for initial setup and powering on the heater's timer.
Step-by-step guide on how to set the current time on the digital timer.
Instructions on how to set ON/OFF times for up to four programs.
Explains how the ADVANCE function moves to the next programmed setting.
Information on charging and maintaining the timer's memory backup batteries.
Describes MANUAL and AUTO operation for Electronic Climate Control.
Steps for initial operation of the ECC model after connecting to mains.
Explains how to enter and exit standby mode on the ECC heater.
How to set the time using the control buttons on the ECC model.
Describes cycling through manual heat settings (OFF, Man On High, L/H, R/H, Full).
How to set the desired temperature using the '+' and '-' buttons on the ECC model.
Guide on setting the ON and OFF times for program P1.
Guide on setting the ON and OFF times for program P2.
How the heater runs programs P1 and P2 when in AUTO mode.
Important note that P1 or P2 cannot be programmed individually.
Method to cancel specific programs by setting ON and OFF times identically.
How to view programmed ON and OFF times for P1 and P2.
Explains how reducing the set temperature to 5°C activates FROST Protection mode.
Information about separate battery packaging and installation for the remote.
Outlines the functions available via the remote control, including temperature and mode adjustment.
Notes that full heat output is only achievable using the remote control.
Advises on proper disposal methods for batteries according to local regulations.
Instructions for storing the heater in a dry, covered place during periods of non-use.
Explains how to store the supply cable using the provided storage area.
Describes the function of the thermal cut-out for preventing overheating.
Information regarding the disposal of electrical products within the European Community.
Warning against disposing of the product with general household waste.
Crucial warning to disconnect the power supply before cleaning the heater.
Specifies cleaning agents and materials that should not be used on the heater.
Provides the recommended procedure for cleaning the heater.
States that the product is guaranteed for five years from the date of purchase.
Details the conditions for free repair or exchange under the guarantee.
Clarifies that guarantee rights are in addition to statutory consumer rights.
Provides contact information for customer services for after-sales support.
Advises against returning faulty products directly to avoid delays and potential damage.
Emphasizes the importance of keeping the receipt as proof of purchase.
General
