Setback Settings
Setback is a function that only modifi es Timer Mode operation. When Setback is enabled
it overrides any Heating O period to maintain a constant temperature during Heating
O periods.
This can be used to prevent the room temperature from falling below a minimum value
while there is no demand for heat (Heating On).
To activate and setup setback mode:
• Hold the ADV and MENU buttons for 2 seconds.
• Use the arrow keys to highlight ‘Sb’ and confi rm using the ENTER key
• Use the arrow keys to select Setback ON or OFF.
• Selecting OFF will return you to the home screen with Setback deactivated.
• If ‘ON’ icon is selected; you will be required to set a Setback temperature.
• Use the arrow keys to select the desired setback temperature. Press ENTER to
confi rm and return to the home screen. Setback mode will be active
30
To Next Page
Loading...
Need help?
General
