3
The ventilation mode "moves" the air allowing for its recycling.
The cooling mode, a refrigerating circuit (compressor), cools the room by transferring
the heat from inside to outside though the air exhaust hose.While cooling, the air-
conditioning unit also dehumidifies the room air.
Humidity absorbed from the air condenses and turns into water that is collected in the
internal tank.The water level in the tank is automatically controlled by a float and micro
switch and when the preset level is exceeded the compressor indicator will blink and
the compressor will shut off automatically, the fan will stay on circulating the air. At this
time, you must empty the water tank as described in "Drainage" page 9.
Please Note!
During very humid conditions it will be necessary to empty the water tank more
frequently.
An added feature of this model, when enough water is collected in the tank, water is
automatically pumped up and through the condenser.The recycled water cools the
condenser which increases the cooling capacity output also evaporating some of the
water alleviating the frequency of having to empty the water tank.
Dehumidification, in the cooling mode your air-conditioner does remove moisture from
the air however another feature of this machine it can be set up to operate as a
Dehumidifier with better moisture removal performance.
Specifications.
Cooling Capacity 12000TU/hr
3024cal/hr
3516 watts
Power consumption 850 Watts
Air Volume (max setting) 455m
3
/h
Humidity removal capacity 24L/day
Net weight 36 kg
Power supply 230-240V/50Hz
Compressor Rotary
Refrigerant R22
Fan Speed 2
Timer 1-12 hours
Thermostat 16-30
Dimension(WxDxH) 377x400x750 mm
Test Conditions Temperature 27°C
Humidity 60%
To Next Page
Loading...
