Remote Control
The remote control comes complete with a CR2025 3V battery
tted. To replace the battery simply remove the securing screw,
unclip and remove the battery cover on the back and replace the
battery, then carefully ret the cover on the back and replace the
battery, then carefully ret the cover, snap into place and ret the
securing screw.
Specication Details - DXMBCF Symbol Value Unit
Maximum Fan Flow Rate F 9.2 m³/min
Fan Power Input P 32.3 W
Service Value SV 0.3 (m³/min)/W
Standby Power Comsumption PSB 0.64 W
Fan Sound Power Level LWA 64 dB(A)
Maximum Air Velocity c 4.1 meters/sec
Rated Voltage V 220-240 V
Rated Frequency Hz 50 Hz
Measurement Standard for Service
Value
IEC 60879:1986
Technical Specication
To Next Page
Loading...
