EasyManua.ls Logo

Dimplex GDC-AC9RW - Remote Control Function; Installation

Dimplex GDC-AC9RW
8 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
REMOTE CONTROL FUNCTION
1. POWER
2. FUNC
3. TIMER
4. AUTO
5. HI
6. MID
7. LOW
8. SLEEP
9. TEMP.
Stop/Start switch
Function “MODE” selector
Hourly programming
A
utomatic fan speed
High fan speed
Medium fan speed
Low fan speed
Night operation selector
Tem
p
erature selecto
r
9
INSTALLATION
Install the portable air conditioner in a flat and spacious location where
the air inlets and outlets will not be blocked. A minimum clearance of
40cm from a wall or other obstacles should be kept (as below picture).
The appliance should not be used in the laundry.
NOTICE
This unit can evaporate the condensation and flow out through the
exhaust hose automatically when the unit is in the cooling function.
Contrarily when the unit is in heating function and the water level reaches
the detected level, it will begin to pump for sixty seconds. After sixty
seconds of pump function, if the water level is still on the detected level,
the unit will stop working and present "E7" warning. Then after three
seconds of relieving malfunction, the unit will rework automatically.
Please make sure that the rubber cap is locked on the drain hose, and
also the exhaust pipe and the drain pipe to be extended to the closest
window when the unit is running.

Related product manuals