Dimplex HTC521W - Page 4

4
Installation
This product is for use with high voltage system (120V~240V) with a
minimum load of 300W; it is not designed for use with low voltage (24V)
central heating & air conditioning systems or wall mounted furnaces.
Inordertoavoidre,shockordeath,shutoffpowersupplyatthecircuit
breaker or fuse and test that the power is off before wiring.
This product must be installed in accordance with the Canadian Electri-
calCode,andintheprovinceofQuebec,byaqualiedelectrician.Dim-
plex assumes no responsibility for damages caused by improper wiring.
Improper installation automatically voids the warranty.
• Verify that the heating appliance that is being connected is
withinthespeciedloadrange.
• Conrmvoltageiswithinthedevicerating.
• For wiring, use copper conductors only.
• Mustbemountedonacertiedelectricalbox.