Dimplex PLX 050E - Warranty; Service Information; Technical Data

www.dimplex.de/en 1810/C EN-12
PLX 050E - PLX 300E English
10.8 Increasing the set point
The room heating device is delivered from the factory
with an adjustable temperature range of 7°C to 26° C.
The upper limit value can be increased (max. 32° C) or
lowered as required.
 Press and hold the MENU key, the BACK key and
the ENTER key for five seconds.
 SP display flashes.
 Press the ENTER key. °C display flashes.
 Press the ENTER key. Display 26 (limit value set at
the factory) flashes.
 Press  or  to increase or lower the desired limit
value.
 Press the ENTER key.
 Confirm the BACK key to return to the standard
display.
10.9 Service information
NOTENOTE
This information is exclusively for service technicians.
The following information can be displayed:
UI number Service number display
CC number: Service number electronics
ID number: Service number heating device
 Press and hold the ENTER key for five seconds.
INFO display flashes.
 Press  or  to select the display Ui, CC or id.
 Confirm the BACK key twice to return to the stand-
ard display.
NOTENOTE
Display id is a code with 12 digits.
The first 4 digits are shown on level 1.
Press  or  to select the next level (2,3).
11. Warranty
This product is supplied with a two-year warranty
according to our terms of guarantee.
12. Note on disposal
Do not dispose of the unit with general
household waste. The device must be taken to
a local waste disposal plant.
13. Technical data
Glen Dimplex Deutschland GmbH Tel.: +49 9221 709 545
Am Goldenen Feld 18 Fax.: +49 9221 709 924545
D - 95326 Kulmbach E-mail: service@gdts.one
Unit type PLX 050E,
PLX 075E
PLX 100E,
PLX 150E
PLX 200E,
PLX
250E/300E
Nominal voltage 1/N/PE, 230 - 240 V~
Degree of protection IP24, splash-proof
Dimensions (W x H x D) 450 x 430
x 108 mm,
620 x 430
x 108 mm
620 x 430
x 108 mm,
690 x 430
x 108 mm
860 x 430
x 108 mm,
860 x 430
x 143 mm
Weight 4.8 kg,
6.2 kg
6.2 kg,
6.6 kg
8.0 kg,
8.6 kg
Heat output
Nominal heat
output
P
nom
0.5 kW,
0.75 kW
1.0 kW,
1.5 kW
2.0 kW,
3.0 kW
Minimum heat
output (guide
value)
P
min
0.5 kW,
0.75 kW
1.0 kW,
1.5 kW
2.0 kW,
3.0 kW
Maximum
continuous heat
output
P
max, C
0.5 kW,
0.75 kW
1.0 kW,
1.5 kW
2.0 kW,
3.0 kW
Intrinsic consumption
With nominal heat
output
el
max
0.0 W 0.0 W 0.0 W
With minimum
heat output
el
min
0.0 W 0.0 W 0.0 W
In standby state el
SB
0.5 W 0.5 W 0.5 W
Regulator for heat output
Electronic room temperature controller with week program, window
monitoring, adaptive control of the heating start and operating time
limit