EasyManua.ls Logo

Dimplex SIK 11 ME - Page 48

Dimplex SIK 11 ME
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
A-X 452231.66.11 · FD 9208 www.dimplex.de
Anhang · Appendix · Annexes
SIK 11ME - SIK 16ME
* Bauteile sind bauseits anzuschließen / beizustellen Components must be connected / supplied by the
customer.
Les pièces sont à raccorder / à fournir par le client
____ werkseitig verdrahtet Wired ready for use câblé en usine
------ bauseits nach Bedarf anzuschliessen to be connected on site if required à raccorder par le client si besoin
ACHTUNG!
An den Steckklemmen J1 bis J7, J9 bis J11,
J24 und der Klemmleiste X3 liegt
Kleinspannung an. Auf keinen Fall darf hier
eine höhere Spannung angelegt werden.
ATTENTION!
Plug-in terminals J1 to J7, J19, J9 to J11, J24
and of terminal strip X3 are connected to extra-
low voltage. A higher voltage must on no
account be connected.
ATTENTION !
Une faible tension est appliquée aux bornes
enfichables J1 à J7, J9 à J11, J24 à et au
bornier X3. Ne jamais appliquer une tension
plus élevée.

Table of Contents

Other manuals for Dimplex SIK 11 ME

Related product manuals