Figure 8
Battery Access Panel
Battery
Wire
Leads
or operate for a minimal period
of time while not plugged in, the
battery may need to be replaced.
To Replace The Battery
WARNING: Read battery
safety instructions prior to
attempting to replace battery.
① Unplug the unit from power
outlet.
② Remove the electric fireplace
from the wall mount bracket and
place on a flat surface.
③ On the back of the replace,
remove the eight (8) screws from
the battery access cover located
Figure 7
Battery Access Panel
Screws
to
Remove
Screws
to
Remove
Maintenance
in the bottom, right corner
(Figure 7).
④ Remove the battery access
cover.
⑤ There are wire leads
connecting the battery to the
replace. Remove the battery
from the replace.
⑥ Remove the two (2) wire
connectors from the battery being
careful not to damage the battery
connections (Figure 8).
⑦ Replace the battery and re-
connect the wire leads with black
leading to black and red leading
to red to ensure correct polarity.
⑧ Insert the replacement
battery into the replace, carefully
To Next Page
Loading...
