Maintenance
orienting the wire leads so that
they are not pinched by the
access cover.
⑨ Replace the access cover and
screws removed in step 3.
WARNING: Contact your
local recycling center for
proper disposal of the battery.
Do not dispose of in fire, or
place near extreme heat.
Mirror Cleaning
The mirror is cleaned in the
factory during the assembly
operation. During shipment,
installation, handling, etc., the
mirror may collect dust particles;
these can be removed by dusting
lightly with a clean dry cloth.
To remove ngerprints or other
marks, the mirror can be cleaned
with a damp cloth. The mirror
should be completely dried with
a lint free cloth to prevent water
spots. To prevent scratching, do
not use abrasive cleaners.
Fireplace Surface
Cleaning
Use only a damp cloth to clean
painted surfaces of the replace.
Do not use abrasive cleaners.
Servicing
Except for battery replacement
and cleaning described
above, an authorized service
representative should perform
any other servicing.
To Next Page
Loading...
