Figure 5
Power Input
Fireplace Installation
⑧ Hang your electric replace
onto the wall mount bracket as
shown in Figure 4. The metal
lip on the back of the replace
should rest on the wall mount
bracket.
Figure 4
Wall
Segment
Front of Fireplace
⑨ Carefully spread supplied
rocks on front tray of the fireplace.
⑩ Using the supplied power cord,
plug in your electric fireplace
to charge the factory installed
battery. The power input on the
fireplace is located on the bottom
of the fireplace, under the right
hand corner (Figure 5).
!
NOTE: Dimplex recommends
leaving your electric fireplace
plugged in to charge over night
for first time use.
To Next Page
Loading...
