OPERATOR’S MANUAL with Maintenance Information
Decals
8
Decal Inspection
Use the pictures on the next page to verify that all decals are legible and in place.
Below is a numerical list with quantities and descriptions.
Decal, Danger-Tip-over hazard, tilt-alarm
Decal, Label-Capacity 159kg
Decal, Label-Capacity 136kg
Decal, Notice-Main power switch operation
Decal, Instructions-Maximum wheel load 425kg
Decal, Instructions-Maximum wheel load 500kg
Decal, Instructions-Tie down point
Decal, Danger-Do not stand
Decal, Warning-Crushing hazard
Decal, Instructions-Refer the operator to the
instructions for use
Decal, Instructions-Open/close
Decal, Warning-Tip-over hazard
Decal, Warning-Crushing hazard/ Falling hazard
Decal, Label-Lanyard anchorage point
Decal, Warning-Use indoors only
Decal, Caution-Max. manual force 200N
Decal, Danger-Electrocution hazard
Decal, Instructions-Forklift pockets
Decal, Instructions-Emergency lower
Decal, Danger-Explosion/burn hazard