OPERATOR’S MANUAL with Maintenance Information
Control Panel
13
Ground Control Panel
1 LED
Diagnostic read out and battery charge
indicator.
5 Platform up / down switch
Move the switch up and the platform will
raise. Move the switch down and the platform
will lower.
2 Hour meter
The hour meter displays the number of
hours the machine has operated
6 Key switch for platform / off / ground control
selection.
Turn the key switch to the platform position
and the platform controls will operate. Turn
the key switch to the off position and the
machine will be off. Turn the key switch to the
base position and the ground controls will
operate.
3 Red Emergency Stop button
Push in the red Emergency Stop button to
the off position to stop all functions. Turn
the red Emergency Stop button clockwise
to the on position to operate the machine.
4 Circuit breaker
When the current was overloaded, the
circuit breaker will cut off the circuit.
7 Overload indicator light
Light on indicates when overloaded.
To Next Page
Loading...