DINGLI AMWP8-1200 - AMWP9.5-1200 Specs

OPERATOR’S MANUAL with Maintenance Information
Specifications
12
AMWP9.5-1200
Height, working maximum
9.5m
Height, platform maximum
7.5m
Height, stowed maximum
1.99m
Height, guard rails
1.1m
Width
0.80m
Length, platform retracted
1.44m
Platform dimensions
Platform length × width
0.73×0.75m
Maximum load capacity
136kg
Maximum wind speed
0m/s
Wheelbase
1.12m
Turning radius (outside)
1.58m
Turning radius (inside)
0m
Ground clearance
6cm
Ground clearance
Pothole guards deployed
1.4cm
Weight
（See Serial Label）
Machine weights vary with option configurations
Power source
2×12V 115Ah
Controls
Proportional
AC outlet in platform
Standard
Maximum hydraulic
pressure (functions)
180bar
System voltage
24V
Driving wheels
Φ323×100mm
Airborne noise emissions
<70dB
Maximum sound level at normal operating
workstations (A-weighted)
Vibration value does not exceed 2.5m/s
2
Maximum slope rating
Stowed position
25%
Maximum side slope rating
Stowed position
10%
Note: Slope rating is subject to ground
conditions and adequate traction.
Maximum working slope
X-1.5°,Y-3°
Drive speeds
Stowed, maximum
4.0km/h
Platform raised, maximum
1.1km/h
Floor loading information
Tire load, maximum
500kg
Tire contact pressure
10.5kg/cm
2
1028.0kPa
Occupied floor pressure
1489kg/m
2
14.59kPa
Note: Floor loading information is approximate
and does not incorporate different option
configurations. It should be used only with
adequate safety factors.
Continuous improvement of our products is a
DINGLI policy. Product specifications are
subject to change without notice or obligation.