OPERATOR’S MANUAL with Maintenance Information
Control Panel
15
Platform Control Panel
1 Thumb rocker switch for steer functions
Press the thumb rocker switch in either
direction to activate steer function.
2 Drive function select button
Press this button to activate the drive
function.
3 Drive speed button
Press this button to activate the slow or
fast drive function.
4 Red Emergency Stop button
Push in the red Emergency Stop button to
the off position to stop all functions. Turn
the red Emergency Stop button clockwise
to the on position to operate the machine.
5 LED
Diagnostic read out and battery charge
indicator.
6 Horn Button
Push the horn button and the horn will
sound. Release the horn button and the
horn will stop.
7 Lift function select button
Press this button to activate the lift
function.
8 Proportional control handle
Lift function: Press and hold the function
enable switch to enable the lift function on
the platform control handle. Move the
control handle in the direction indicated by
the blue arrow and the platform will raise.
Move the control handle in the direction
indicated by the yellow arrow and the
platform will lower. The descent alarm
should sound while the platform is
lowering.
Drive function: Press and hold the
function enable switch to enable the drive
function on the platform control handle.
Move the control handle in the direction
indicated by the blue arrow on the control
panel and the machine will move in the
direction that the blue arrow points. Move
the control handle in the direction
indicated by the yellow arrow on the
control panel and the machine will move
in the direction that the yellow arrow
points.
9 Function enable switch
Press and hold the function enable switch
to enable the drive/lift function.
To Next Page
Loading...